4X4 Westminster Chime Clock Parts Melody Music Box Music Clock Movement

Detailed operation instructions of music pendulum holder

 

1)       Time selection switch 

There are three selection modes:

1. Night mode. That is, the music is automatically turned off at night. Specifically in PM11:00~AM5:45, the music is automatically turned off, and the time is resumed at AM6:00.

2. 24-hour mode. The music is turned on for 24 hours.

3. The music is turned off. That is, it is turned off for 24 hours.

 

2)       The music selection switch

There are four music options:

1. "AVE MARIA"-(Maria/Virgin Mary) bell; sounds at the hour

Liya Music + Ringtones.

2. "4x4 WEST"-"WESTMINSTER Westminster" church bell;

Westminster Music + Ringtones at 0:00, and at 15, 30, 45

The clock broadcasts 1/4, 2/4 and 3/4 of Westminster music.

3. "WEST"-"WESTMINSTER Westminster" church bell; at the hour

Sound Westminster Music + Ringtones. Compared with the second type, there is less segment broadcast

Features.

4. "BIM BAM"-Hourly chime; BIM BAM sounds at the hour. ring

The sound number represents the time point, so there is no subsequent similar to the above three kinds of music

The bell struck.

 

3)        Reset button 

Press this button, it is equivalent to re-battery, IC internal time reset to 5 am. This function is used to adjust the IC time if the IC's internal time is unclear,you just press this button to reset and avoid removing the battery.

 

4)        Time setting 

It is used to set the internal time of the IC to be consistent with the time pointed by the movement. Every press,the time will be increased by one hour, which is the same as the hourly reminder function of the movement.

This button is not limited by the time selection switch. Even if the time selection switch is in the OFF state, the music will still be sent normally, and the IC will increase the internal time by one hour to set the internal time. However, the movement of the movement will be limited by the time selection switch, that is, the time selection switch is in the OFF state, and the music will not be triggered by adjusting the movement of the movement, but the IC internal time will still be increased by one hour to set the IC internal time.

 

5)         MONITOR-time monitoring. If you need to detect all kinds of music and time, you only need to press the button to send out the corresponding music and hour. Pressing this button will not increase the number of bells.

When the music selection switch is in the second type of music selection, press the button in the following order, and the music will be sent in the following order:

1). Press MONITOR for the first time, the whole piece of music + the number of bells;

2). Press MONITOR for the second time, the music sounds 1/4 segment;

3). Press MONITOR for the third time, the music sounds 2/4 segment;

4). Press MONITOR for the fourth time, the music sounds 3/4 segment;

5). Press MONITOR for the fifth time to return to the pronunciation of the whole point, that is, the whole piece of music + the number of bells.

Continue pressing will cycle from 1) to 5) in this order.

 

6)         Sound adjustment knob 

Used to adjust the volume of music + ringing bells.